CLICK HERE TO SELECT YOUR VEHICLE

1995 Ford Econoline Keyless Entry Remote Fob Programming Instructions

How to Program a 1995 Ford Econoline Keyless Entry Remote Fob

Programming Instructions Step by Step:

1. Turn ignition to RUN or ACC.

2. Jump pins in programming connector plugfor entireprogrammingprocedure. All doors will lock then unlock toconfirm programming mode. (The plug is black with two wires: white with yellow stripe and gray with yellow stripe. The plug comes out of a large harness which runs under the column at the bottom edge of the dash.)

3. Press any button on first keyless remote. Doors locks will cycle to confirm programming.

4. If programming second keyless remote press any button on it and doorlocks will cycle to confirmprogramming.

5. Turn ignition to OFF. Door locks will cycle to indicate end of programming mode.6. Removejumper wire in programming connector.

Use our Locksmith Search if you need professional help.
Back to blog