CLICK HERE TO SELECT YOUR VEHICLE

2003 Acura TL Keyless Entry Remote Fob Smart Key Programming Instructions

How to Program a 2003 Acura TL Keyless Entry Remote Fob

Programming Instructions Step by Step:Note:Entering the programming mode cancels all learned keyless remotes, so none of the previously programmedremotes will work. You must reprogram all of the keyless remotes once you are in the programming mode.

You must complete each step within4 secondsof the previous step to keep the system from exiting the programming mode. You must program remotes within 10 seconds of each other

1. Turn ignition switch to ON (II)

2. Within 4 seconds press the LOCK or UNLOCK button on one of the remotes.

(An unprogrammedremote can be used for this step.)

3. Within 4 seconds turn ignition switch to LOCK (0) position

4. Within 4 seconds turn the ignition switch to ON (II)

5. Repeat steps 2,3 and4 two more times using the same keyless remote used in step 2

6. Within 4 seconds press the LOCK or UNLOCK button on the same remote. Make sure the power doorlocks cycle to confirmyouare in programming mode.

7.Within 10 seconds press the LOCK or UNLOCK button on same remote.

8. Within 10 seconds press the LOCK or UNLOCK buttonon all other remotes youwant to program.Make sure door locks cycleafter youpush each remote button to confirm systemhas acceptedthe remote.

9. Turn the ignition switch to LOCK (0) to exit programming mode.

10. Test remote(s)

Use our Locksmith Search if you need professional help.
Back to blog