CLICK HERE TO SELECT YOUR VEHICLE

2007 Buick Terraza Keyless Entry Remote Fob Smart Key Programming Instructions

Programming Instructions for 2007 Buick Terraza Remote Fob

IMPORTANT - READ ME

Your vehicle requires that remotes must be programmed by an automotive locksmith or dealership. There is no way to program themwithout the proper diagnostic tools.
Please hand these instructions to your locksmith or automotive professional.
Dear automotive professional,
If the vehicle does not accept the remote during your standard programming procedure, please try these steps.
Instead of holding down LOCK & UNLOCK for 15 seconds. Press and hold LOCK & UNLOCK for 6 seconds, release BOTH buttons and tap ONLY the UNLOCK button.
If that doesn't work please make sure that the vehicle's battery has a full 12v charge.
It is always best to program remotes with a Jump Pack connected to the vehicles battery.
These vehicles only have a maximum of 4 remotes so please make sure that the vehicle is not maxed out on remotes.
Please make sure that the vehicle does not any sort of aftermarket alarm or remote start. These will need to be disabled before new remotes can be programmed.
We test all remotes prior to shipping but sometimes batteries can get drained while in transit from other packages pressing on the buttons for extended periods of time. If the remotes still do not program please have the customer contact us so that we can better assist them.

Key Programming Information for 2007 Buick Terraza

1. Insert the original, already programmed key in the ignition and start the engine.
2. After the engine has started, turn the key to off and remove the key.
3. Insert the key to be programmed and turn it to on within 10 seconds of removing the original key.
4. The security light will turn off once the key has been programmed. It may not be apparent if the security lightwent on due to how quickly the key is programmed. If your vehicle does not have a security light (04-07 GrandPrix, Bonneville, Impala) wait 10 minutes and 45 seconds to make sure the key has been programmed.
5. Repeat steps 1 through 5 if additional keys are to be programmed.

Use our Locksmith Search if you need professional help.
Back to blog